45
Pairing and connecting a Bluetooth
phone
44
(The factory state passkey is 0000.)
As shown in the figure, once the
passkey becomes successfully-
inputted, the Bluetooth
connec-
tion between the car system and
mobile phone will start.
Once Bluetooth
connection is suc-
cessful, the name of the connected
mobile phone will become dis-
played on the PHONE screen and
Bluetooth
handsfree functions will
operate.
INFORMATION
Some functions may not be supported
due to limited Bluetooth
compatibili-
ty between the car system and mobile
phone.
Press the button on the
PHONE screen.
Press the button on the
Settings screen.
The list of currently paired phones
will be displayed. Select the phone
you wish to connect from the list
and press the button.
INFORMATION
When there are no paired phones, pair
the mobile phone through [Settings
> Pairings > Add to].
Connect
Connections
Settings
i
Connecting a mobile phone
The Bluetooth
connection between
the car system and mobile phone will
start.
Once Bluetooth
connection is suc-
cessful, the name of the connected
mobile phone will become dis-
played on the PHONE screen and
Bluetooth
handsfree functions will
operate.
If the connection between the
mobile phone and Bluetooth
fails,
the following pop-up will be dis-
played. If problems occur while
connecting Bluetooth
, check for
the following conditions.
Whether the mobile phone you
wish to connect is in the vicinity of
the car system.
Whether the power of the mobile
phone Bluetooth
has been turned off.
Whether the mobile phone Bluetooth
has been set to hidden state.
Whether there are Bluetooth
com-
patibility issues between the car sys-
tem and another mobile phone.
i
To Next Page
Loading...
Need help?
General
