3-16 NAVIGATION SYSTEM
PART 3 NAVIGATION SYSTEM
8. Input the house number and press the
Done
button to complete.
If the House number is not recognized,
press the
Skip
button.
In this case, the range of house numbers
will be displayed during the last step.
9. Input the Street name and press the
List
button to complete.
If the number of matches with the input is
less than 4 results, then the street list screen
will be displayed automatically.
10.
Select the desired street from the list and
the corresponding position will be dis-
played on the map.
11. This screen will be displayed if the House
number had not been inputted during
step 8 and more than 2 House number
ranges exist.
Select the desired House number range.
12. This screen will be displayed if the House
number had not been inputted during
step 8 and only one House number range
exists.
Select the house number range and Press
the
Done
button to complete.
The corresponding position will be
displayed on the map.
Voice Command
1. Press the key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Find address"
[Find address], page 4-19.
To Next Page
Loading...
Need help?
General
