Indicate that an alarm has occurred. Turn red in the alarm state. Clicking the buttons will
toggle between displaying/not displaying buttons such as the alarm log button and the
alarm reset button.
④
Error button
Indicate that an error has occurred. Turn yellow in the error state. Clicking the buttons will
toggle between displaying/not displaying buttons such as the error log button and the
error reset button.
⑤
Alarm log display button
The alarm log are displayed on the operation panel of the control screen. Up to 1000 alarm
logs are saved.
When more than 1000 logs are filed, the older logs will be overwritten by the newer logs. In
this case, the oldest log is the first to be overwritten.
⑥
Alarm reset button
Cancels the alarm action. If the recording time of emergency recording is set to "Ext.", the
emergency recording will be stopped. Clickable only in the alarm state and emergency
recording state.
⑦
Error log display button
The error (trouble) logs are displayed on the operation panel of the control screen. Up to
1000 error logs are saved. When more than 1000 logs are filed, the older logs will be
overwritten by the newer logs. In this case, the oldest log is the first to be overwritten.
⑧
Error reset button
Cancels the error (trouble) action. Clickable only in the error state.
⑨
Information display button
Displays system and HDD information of the recorder.
[Operation via recorder's main monitor]
235
To Next Page
Loading...
Need help?
General
