3153 Display Station
The 3153 is an ASCII display station that attaches to a system that supports ASCII displays. It operates on
a serial communications port with a choice of RS232C or RS422A communications interface. For
additional information, see 3153 Marketing Reference Guide, order number G520–9415.
Dimensions
Display with
Tilt/Swivel¹
Height 330 mm 13.0 in
Width 318 mm 12.5 in
Depth 340 mm 13.4 in
Keyboard
Height 38 mm 1.5 in
Width 451 mm 17.8 in
Depth 158 mm 6.3 in
Weight
Display with
Tilt/Swivel
7.7 kg 16.9 lbs
Keyboard 0.9 kg 2.0 lbs
Electrical
Voltage range (V ac) 100 to 240
Frequency (hertz) 50 or 60
Thermal Output 222 Btu/hr
Power requirements
(typical)²
41 watts
Power requirements
(maximum)
65 watts
Maximum altitude 3048 m (10000 ft.)
Temperature
Requirements
Operating
10 to 40°C
(50 to 104°F)
Power Off, Shipping, Storage
0 to 50°C
(-32 to 122°F)
Humidity
Requirements
Operating Power Off, Shipping, Storage
(Noncondensing) 30 to 80 % 10 to 95 %
Noise Emissions³⁴ Operating Idle
L
WAd
4.8 bels or less –
Service Install so that air vents are not blocked.
1. The display tilt/swivel stand has a +15° to -3°of tilt, +/- 135° of swivel and is not detachable from the display.
2. Power consumption is reduced to less than 15 watts when power management feature is enabled.
3. See “Noise Emission Notes” on page 336 for definitions of noise emissions positions.
4. The noise emission level stated is the declared (upper limit) A-weighted sound power level, in Bels, for a random
sample of monitors.
Chapter 4. Physical Characteristics of Displays 227
To Next Page
Loading...
Need help?
General