7208 Model 345 External 8-mm Tape Drive
Dimensions
Height 55 mm 2.2 in.
Width 250 mm 9.8 in.
Depth 275 mm 10.8 in.
Weight
Minimum 3.7 kg 8 lbs.
Maximum 3.7 kg 8 lbs.
Electrical
Power source loading 0.023
(typical in kVA)
Voltage range (V ac) 100 to 125 or 200 to 240 (autoranging)
Frequency (hertz) 50 or 60
Thermal output
(typical)
44 Btu/hr
Power requirements
(typical)
30 watts
Power factor 0.58
Maximum altitude 2135 m (7000 ft.)
Temperature
Requirements
Operating
16 to 32°C
(60 to 90°F)
Non-Operating
1 to 60°C
(34 to 140°F)
Humidity
Requirements
Operating Non-Operating
(Noncondensing) 20 to 80% 20 to 95%
Wet Bulb 23°C (73°F) 27°C (80°F)
Noise Emissions¹ Operating Idle
L
WAd
5.9 bels 5.5 bels
L
pAm
N/A N/A
<L
pA
>
m
38 dBA 38 dBA
Impulsive or
prominent discrete
tones
No No
Clearances Front Back Left Right
Install/Air Flow² 152mm(6 in) 152mm(6 in) N/A N/A
Service 152mm(6 in) N/A N/A N/A
Footprint
2
Width
250mm(9.8 in)
Depth
575mm(22.6 in)
1. See “Noise Emission Notes” on page 336 for definitions of noise emissions positions.
2. The amount of space needed by the unit during normal operation is indicated by the footprint dimensions.
302 Site and Hardware Planning Information
To Next Page
Loading...
Need help?
General