EasyManuals Logo
Home>IBM>Enclosure>7226

IBM 7226 Manual

IBM 7226
296 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
If the green
Ready Status
LED is...
and the amber
Fault status
LED is...
and the SCD
is...
and the SCD
Dot is...
Meaning
Green/ Solid Off Off Off The 7226 drive feature and eServer drives are
powered on and in an idle state. The 7226 drive
feature drive will be in this state when powered on
even if no tape is loaded. For the eServer drive, this
state also means a tape is loaded
Off Amber/ Solid or
Flashing
Displaying an
error code or
Maintenance
Mode Function
On/Off The drive is displaying error code(s) from the error
code log on the SCD.
Flashing/Off Amber/ Solid Displaying
o
Off/On The Ready Status LED is Flashing while in
maintenance mode for both the 7226 drive feature
and eServer drives. When exiting, the Ready Status
LED is Off on the 7226 drive feature, but is still
Flashing on the eServer.
Off (7226 drive
feature)
Flashing
eServer)
Amber/ Solid Flashing
selected
function
Off/On The 7226 drive feature drive is executing the
selected function while in maintenance mode. The
Ready Status LED on the eServer drive will be
Flashing while executing the selected function.
Off Flashing Amber;
once per second
(7226 drive
feature)
Solid/ Flashing
Amber (eServer)
Displaying error
code
Off An error occurred and the drive or media may
require service, or it may require cleaning. Note the
code on the SCD, then go to Error Codes and
Messages to determine the action that is required.
Off Flashing Amber
(7226 drive
feature)
Solid Amber
(eServer)
Displaying
c
Off The drive needs cleaning.
Off Flashing Amber
(twice per
second)
Off Off The drive detected an error and is performing a
firmware recovery. It will reset automatically.
Off (7226 drive
feature)
Flashing
(eServer)
Amber/Solid Flashing
c
Off The drive is requesting a cartridge to be loaded,
which would only be in Maintenance mode.
Off Flashing Amber
(twice per
second)
Off On There is a drive dump in flash memory.
Unload Button
The Unload Button (1 in Figure 1) performs the following functions:
Table 1. Unload Button Functions
Unload Button
Function
How to Initiate the Function
IBM 7226 Model 1U3 Storage Device Enclosure 123

Table of Contents

Other manuals for IBM 7226

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM 7226 and is the answer not in the manual?

IBM 7226 Specifications

General IconGeneral
BrandIBM
Model7226
CategoryEnclosure
LanguageEnglish

Related product manuals