To Next Page

To Previous Page

The 7226 Storage Enclosure is now prepared for service.

Completing the 7226 Storage Enclosure Service Procedure

Use the following procedure to install the top cover and insert the 7226 Storage Enclosure into the rack.

1. Place the Top Cover on the 7226 Storage Enclosure 1. Slide it forward 2 until the tabs are fully engaged 3.

Figure 1. Top Cover

2. Tighten the Top Cover Thumbscrews 1.

Figure 2. Top Cover Thumb Screws

3. Lift the blue release latches 1 on the slide rails and push the 7226 Storage Enclosure 2 all the way into the rack until it

clicks into place.

Figure 3. Release latches and 7226 Storage Enclosure

64 IBM 7226 Model 1U3 Storage Device Enclosure

Other manuals for IBM 7226

Questions and Answers:

Need help?

Do you have a question about the IBM 7226 and is the answer not in the manual?

General