IBM Aptiva User Manual (English)

Other manuals for IBM Aptiva

Manual2 pages

Hardware Maintenance Guide282 pages

Hardware Handbook166 pages

Handbook204 pages

Questions and Answers:

J
Jonathan RichardsonSep 4, 2025
What to do if I can’t read information on diskette or CD on my IBM Desktop?
- D
  danielkaneSep 5, 2025
  If you can’t read information on a diskette or CD with your IBM Desktop, try these steps: 1. Make sure you are using the correct type of diskette and that it is formatted correctly. 2. Ensure the diskette or CD is inserted correctly into the drive. 3. Check that the CD is clean and not scratched. 4. Try reading a known good diskette or CD. If it works, the first diskette or CD is damaged. If the good diskette or CD can’t be read, there may be a problem with your drive. 5. Make sure the drive power and signal cables are securely attached to the back of the drive.
D
Desiree McintoshAug 23, 2025
What to do if IBM Aptiva Desktop screen is black with multiple beeps?
- D
  daniel00Aug 23, 2025
  If you see a black screen and hear multiple beeps during the self-test of your IBM Desktop, ensure that any recently installed memory modules or adapter cards are correctly installed.
D
dominicturnerSep 3, 2025
How to resolve modem/communications errors on IBM Desktop?
- H
  Heather GarciaSep 3, 2025
  If you are experiencing modem or communications errors with your IBM Desktop, try the following: 1. Make sure the telephone cord is securely plugged into both the telephone outlet in the wall and the system unit. 2. Verify the telephone line is working by plugging a working telephone into the same outlet and making a call. 3. Ensure you are calling the correct number and using the correct communications settings. 4. Confirm that no one is using the telephone while you are communicating with another computer. 5. If some communications programs work while others do not, there might be a configuration problem. 6. Make sure your modem cord is connected to an analog telephone line. 7. Ensure the modem adapter card is installed correctly.
B
Brian HernandezSep 2, 2025
What to do if I can’t enter password on my IBM Desktop?
- L
  Lindsey BakerSep 2, 2025
  If you can’t enter your password on your IBM Desktop, follow these steps: 1. Double-check that you are typing the correct password. 2. Ensure the keyboard cable is correctly and securely connected to the keyboard port (not the mouse port) on the back of the system unit. The keyboard port has a symbol next to it. 3. If you have forgotten your password, check your Services and Support Guide for information on obtaining service.
W
William KleinSep 1, 2025
How to fix IBM Desktop mouse that does not move the cursor?
- J
  Jennifer Valenzuela PhDSep 1, 2025
  If the mouse does not move the cursor on your IBM Desktop, here’s what you can do: 1. Try using the mouse on a mouse pad. 2. Ensure that the screen you're using supports mouse functionality. 3. Verify that the mouse cable is securely connected to the mouse port (not the keyboard port) on the back of the system unit; the mouse port has a symbol next to it. 4. Clean the mouse. 5. Turn the system unit off, wait 10 seconds, and then turn it on again.
L
Linda ScottAug 31, 2025
Why doesn’t my IBM Desktop go into Standby or automatically power off when the set time has elapsed?
- S
  Sarah MillerAug 31, 2025
  If your IBM Desktop computer doesn’t go into Standby or automatically power off when the set time has elapsed: 1. Avoid touching the mouse or keyboard and starting applications that use the hard disk (like File Manager or a Windows screen saver). These actions reset the timer. 2. If the computer doesn't automatically turn off, ensure the Automatic Power Off option is enabled in Rapid Resume or on the Rapid Resume menu of the Configuration/Setup Utility.
R
Rachel HancockAug 30, 2025
Why does my IBM Desktop keyboard doesn’t work or only some keys work?
- B
  bfrankAug 30, 2025
  If your IBM Desktop keyboard isn’t working or only some keys work, try the following: 1. Make sure the keyboard cable is correctly and securely connected to the keyboard port (not the mouse port) on the back of the system unit. The keyboard port has a symbol next to it to help you. 2. Move your fingers across the keys to ensure none are stuck. 3. Make sure you are using a screen that allows typing, as some screens do not. 4. Turn the system unit off, wait 10 seconds, and then turn it on again.
O
orobinsonAug 28, 2025
How to fix IBM Aptiva Desktop when there is no beep during POST?
- K
  Kelly WatersAug 28, 2025
  Make sure that the system unit of your IBM Desktop is turned on.
E
Elijah KleinAug 27, 2025
Why does my IBM Aptiva Desktop turn off without warning?
- O
  obonillaAug 27, 2025
  If your IBM Desktop turns off unexpectedly, ensure the system unit and monitor power cords are securely plugged into electrical outlets. Also, check for blown fuses, tripped circuit breakers, or a power failure. Verify that all cables are correctly and securely connected to the system unit. If you've enabled the Standby feature, move the mouse to exit Standby. If you're using Rapid Resume with the Automatic Power Off option or the Scheduler feature, simply turn the system unit back on.
C
Christian CarterAug 26, 2025
What to do if IBM Desktop has error code, more than one beep, or continuous beep?
- N
  Nicholas HarperAug 27, 2025
  If your IBM Desktop displays an error code, consult “Error codes, descriptions, and corrective actions” on page 52 and follow the listed action. If no error code is displayed, refer to your Services and Support Guide for service information.