Why can't I enter password on my IBM Desktop?
If you are unable to enter your password on your IBM Desktop, ensure you are typing the correct password. Also, verify that the keyboard cable is securely connected to the correct keyboard port (not the mouse port) on the back of the system unit.
What to do if my IBM Aptiva Desktop turns off without warning?
If your IBM Desktop turns off unexpectedly, here's what to do: 1. If Standby is enabled, move the mouse. 2. If Rapid Resume and Automatic Power Off are enabled, or the Scheduler feature is set to turn off the system, turn the system back on. 3. Ensure both the system unit and monitor power cords are securely plugged into electrical outlets. 4. Verify all cables are correctly and securely connected to the system unit. 5. Check for blown fuses, tripped circuit breakers, or power failures. 6. Unplug the system unit power cord, wait 10 seconds, and plug it back in. If it doesn't start, press the on/off button.
General| CPU | Intel Pentium |
|---|---|
| RAM | 8 MB to 64 MB |
| Operating System | Windows 95 |
| Graphics | S3, ATI |
| Optical Drive | CD-ROM |
| Ports | Serial, Parallel, PS/2 |
| Expansion Slots | ISA, PCI |
To Next Page
