IBM Aptiva Hardware Maintenance Guide

4-12
NOTE: Reinstall the 3.5-in Drive Frame
•
Before reinstalling the drive frame into the main unit, make sure the upper
and lower drive frames are properly reattached.
•
Align the front notch of the drive frame with the system chassis
•
Align the top rail of the drive frame with the system chassis and swing
inward until “click” to locked.
Figure 4- 11 Reattach the 3.5-inch drive
•
Re-attach the power and signal cables to the drives.

IBM Aptiva Specifications

General

CPU	Intel Pentium
RAM	8 MB to 64 MB
Operating System	Windows 95
Graphics	S3, ATI
Optical Drive	CD-ROM
Ports	Serial, Parallel, PS/2
Expansion Slots	ISA, PCI