IBM Aptiva Hardware Maintenance Guide

1-6
NOTE: Modem voice feature is an optional item, some models may come
whithout it. If system has this feature, a 4-pin modem voice-
in/speaker-out cable should present.
•
Telephone line-out (RJ-11) connector.
•
Telephone line-in (RJ-11) connector.
Monitor
•
Super video graphics array (SVGA) monitor.
•
Compliant to VESA power saving mode.
•
Connector for a detachable grounded 3-wire power cord.
•
1.8-m (5.8-ft) attached signal cable.
•
Auto-sensing power input for 100 Vac to 240 Vac.
•
14” (13.1” viewable image size) monitor
−
0.28-mm dot pitch
−
Automatic scanning horizontal frequencies from 30KHz to 54KHz
and all vertical frequencies between 50Hz and 120Hz.
−
With DDC2A/B feature
•
15” (13.6” viewable image size) monitor
−
0.28-mm dot pitch
−
Automatic scanning horizontal frequencies from 30KHz to 54KHz
and all vertical frequencies between 50Hz and 120Hz.
−
With DDC2A/B feature
•
15” (13.7” viewable image size) monitor
−
0.28-mm dot pitch
−
Automatic scanning horizontal frequencies from 30KHz to 69KHz
and all vertical frequencies between 50Hz and 120Hz.
−
With DDC1/2B+ feature and OSD (on-screen display) menu
•
17” (15.7” viewable image size) monitor
−
0.27-mm dot pitch
−
Automatic scanning horizontal frequencies from 30KHz to 72KHz
and all vertical frequencies between 50Hz and 120Hz.
−
With DDC1/2B+ feature and OSD (on-screen display) menu

IBM Aptiva Specifications

General

Brand	IBM
Model	Aptiva
Category	Desktop
Language	English