124 Chapter 8: Diagnosing and recovering from problems
127 Processor Speed Error • If you changed the processor, it may not be fully supported by the BIOS. The
computer will operate normally but you will always see this error when you
turn on the computer.
• If you did not change the processor
, turn off the system, wait 15 seconds,
and then turn on the system again.
129 System Board Error See error code 10X on page 123.
151 Date and Time Incorrect See error code 163 on page 126.
161 Bad CMOS Battery Make sure the battery is installed correctly. If the error continues, install a new
battery. For instructions on installing the battery, see “Replacing the system
battery” on page 74.
Table 7: Error codes, descriptions, and corrective actions
Error Code Description Here’s what to do:
Notes:
1. An X shown as part of the error code in this table represents any number between 0 and 9.
2. If any of these problems continue after taking the actions listed, see your online Aptiva Helper for information on running
diagnostics. If you need service, see the HelpWare book.
To Next Page
Loading...
Need help?
General
