Component LED
Function
Location LED Color OFF ON
Electronics Component LEDs
PCI Adapters
Power
PCI Riser Card
(board socket)
Green (4x) PCI Hot-Plug Standard
Attention
PCI Riser Card
(board socket)
Amber (4x) PCI Hot-Plug Standard
Memory DIMMs Identify Processor
Board (Top)
Amber (8x) Normal Fault
CEC Backplane Identify CEC Backplane Amber (1x) Normal Fault
Processor Board Identify Processor
Board (Top)
Amber (1x) Normal Fault
PCI Riser Card Identify PCI Riser Card Amber (1x) Normal Fault
Disk Drive
Backplane
No LED
Component LED
Function
Location LED Color OFF ON
Port LED Indicators
SCSI Port Activity Operator Panel Green (1x) No Activity Activity
RIO Port
Identify CEC Backplane Amber (2x)
Normal Fault
If blinking = Identify
Ethernet Port
Ethernet0,
Ethernet1
Mode
CEC Backplane Green(2x) 10Mbit Mode 100Mbit
Mode
Activity CEC Backplane Green (2x) No Activity Activity
Activity Operator Panel Green (1x) No Activity Activity
Reporting the Problem
After you have determined which component is failing, report the problem as follows:
1. Record the following information before call for service:
v Machine type and model number
v Server serial number
v Any error codes that appear in the operator panel display or console
v The adapter or device containing the lit amber-colored LED
2. Call for service. You will be given the choice to replace the failing component
yourself or have a service representative replace it for you. If you decide to replace
the failing component, go to “Repair Action” on page 144 for instructions.
Appendix D. Fault and Attention LEDs 143
To Next Page
Loading...
Need help?
General