Step 6. Attach the Mounting Hardware to the Rack Enclosure
Before performing this procedure, read through each step and study the illustrations.
Attention: Mounting the rails is a complicated procedure. To install the rack
rails correctly, you must read, then perform each procedure step in the order
given. Failure to do so may cause rail failure resulting in system drawer damage
or bodily injury.
To install the rack-mounting hardware to the rack, do the following:
1. Locate the hardware mounting kit, rack-mounting template and the system rails
that were shipped with your system.
1 Rack-Mounting Template
2 Rack-Mounting Hardware Kit
3 System Rail Assemblies
Chapter 2. Setting Up the System
13
To Next Page
Loading...
Need help?
General