Icom IC-7100

1
PANEL DESCRIPTION
1-12
Previous view
D Function keys on M-1 display
SCAN KEY [SCAN] (p. 147)
Touch to display the “SCAN” screen.
SPLIT SWITCH [SPLIT] (p. 82)
➥ Touch to turn the split function ON or OFF.
• “SPLIT” appears when the split function is ON.
➥ Touch for 1 second to activate the quick split func-
tion.
• The transmit frequency shifts from the receive frequency
according to the “SPLIT Offset” option in the Set mode.
(p. 162)
• The quick split function can be turned OFF in
the “Quick
SPLIT” item
of the Set mode. (p. 162)
VFO SELECT SWITCH [A/B] (pp. 32, 34)
➥ Touch to select either VFO A or VFO B.
➥ Touch
for 1 second to equalize the undisplayed VFO
settings to that of the displayed VFO.
VFO/MEMORY SWITCH [V/M]
➥ Touch to switch between the VFO and memory
modes. (pp. 34, 139)
• Touching Memory channel also selects the VFO or mem-
ory modes. (p. 162)
➥ Touch for 1 second to copy the memory contents to
the displayed VFO on the MAIN Band. (p. 142)
MEMORY WRITE SWITCH [MW] (p. 140)
Touch for 1 second to store VFO data into the selected
memory channel.
• This can be done in both the VFO and memory modes.
D Function keys on M-2 display
DUPLEX KEY [DUP] (p. 65)
➥ Touch to select the duplex direction, or to turn OFF
the function.
• “DUP–” or “DUP+” is displayed during duplex operation.
➥ In the FM mode, touch for 1 second to turn the one-
touch repeater function ON or OFF.
AGC KEY [AGC] (p. 72)
(Mode: SSB/SSB-D/CW/RTTY/AM/AM-D)
➥ Touch to select the time constant of the AGC circuit.
➥ Touch for 1 second to display the “AGC” screen.
TONE SQUELCH KEY [TONE] (pp. 62–64)
(Mode: FM)
➥ Touch to select a tone function between subaudible
(repeater) tone, tone squelch and DTCS code.
➥ Touch for 1 second to display the “TONE” screen of
the selected tone function.
DIGITAL SQUELCH KEY [DSQL] (p. 114)
(Mode: DV)
➥ Push to select a digital squelch function between
digital call sign squelch and digital code squelch.
➥ Hold down for 1 second to display the “DSQ” screen
(digital squelch).
MEMORY KEYER MENU KEY [KEYER] (p. 50)
(Mode: CW)
Push to display the “ KEY ” screen (memory keyer) or the
“ SEND ” screen (keyer send), depending on the “KEYER
1st Menu” option in the Set mode
(p. 165) .
SPEECH COMPRESSOR KEY [COMP] (p. 80)
(Mode: SSB)
➥ Touch to turn the speech compressor function ON
or OFF.
• “COMP” is displayed when the speech compressor is
ON.
➥ Touch for 1 second to display the “COMP” screen.
RTTY MENU KEY [RTTY] (p. 57)
Touch to display the “RTTY” screen.
CALL SIGN KEY [CS](F-1) (p. 85)
(Mode: DV)
Touch to display the “CS” screen.
• The current call sign for DV operation appears.
TRANSMISSION BANDWIDTH KEY [TBW] (p. 80)
(Mode: SSB)
➥ Touch to display the selected
transmission band-
width.
➥ Touch for 1 second to select the transmission band-
width.
• Bandwidth is selectable from wide (WIDE), middle (MID)
and narrow (NAR).
1
⁄4 TUNING FUNCTION KEY [
1
⁄4] (p. 39)
(Mode: SSB-D/CW/RTTY)
Touch to turn the
1
⁄4 Tuning function ON or OFF.
• “ ” is displayed when the
1
⁄4 Tuning function is ON.
CALL RECORD KEY [CD] (p. 95)
(Mode: DV)
Touch to display the “CD” screen.
• The call record channel appears. (RX01 to RX20)