Icom IC-F7000 Instruction Manual

42
6
SET MODE
6
DD
Setting I/O
q Push [
√√
] twice to select ‘I/O,’ then push [OK
≈≈
] to
edit ‘I/O.’
w Push [
∫∫
]/[
√√
] to select the desired item.
• Push [
ΩΩ
CLR] to return the set mode menu .
e Push [
ΩΩ
CLR]/[OK
≈≈
] to set the values or condi-
tions for the selected item.
r After all setting is finished, turn power OFF and ON
again to exit the Initial set mode.
[Ω CLR]/[OK ≈]
[∫]/[√]
I/O
--ICOM-TUNER-230
è-FSK-SHIFT--170
--AUTO-TUNE--OFF
--FSK-TONE---1615
SET-MODE
--CH-LIST-
è-SCAN
--ID-LIST
--I/O------å
External antenna tuner type
This item selects the connected Icom antenna tuner
type from AT230, AT-140, AT-130.
(default: AT230)
I/O
--ICOM-TUNER-ç-230-å
è-FSK-SHIFT--170
--AUTO-TUNE--OFF
--FSK-TONE---1615
Automatic tune
When an optional automatic antenna tuner is con-
nected, tuning can be started automatically without
pushing [TUNE], for instant operation.
(default: OFF)
I/O
--ICOM-TUNER-230
è-FSK-SHIFT--170
--AUTO-TUNE--ç-OFF-å
--FSK-TONE---1615
FSK tone frequency
Several mark frequencies are used for FSK operation.
This item selects an FSK mark frequency for almost
any FSK system from 1200 Hz, 1275 Hz, 1487.5 Hz,
1615 Hz, 1700 Hz, 2100 Hz and 2125 Hz.
(default: 1615 Hz)
I/O
--ICOM-TUNER-230
è-FSK-SHIFT--170
--AUTO-TUNE--OFF
--FSK-TONE---ç-1615-å
FSK shift
Several shift frequencies are used for FSK operation.
This item selects an FSK shift frequency for almost any
FSK system from 850 Hz, 425 Hz, 200 Hz and 170 Hz.
(default: 170 Hz)
I/O
--ICOM-TUNER-230
è-FSK-SHIFT--ç-170-å
--AUTO-TUNE--OFF
--FSK-TONE---1615

Icom IC-F7000 Specifications

General

Brand	Icom
Model	IC-F7000
Category	Transceiver
Language	English