43
6
SET MODE
FSK polarity
Normal and reverse polarities are available for FSK
operations This item allows you to select one of these
polarities.
(default: Normal)
é-FSK-POLARI-ç-NOR-å
--CW-BK-IN---FULL
è-TENKEY-----ON
--REMOTE-ID--10
--MIC-KEY----ON
CW break-in
The CW break-in function (in CW mode) toggles
transmit and receive with CW keying. Full break-in al-
lows you to receive signals between transmitted key-
ing pulse during CW transmission. Semi break-in
allows you to mute receiving until keying stops with
some delay time. (default: Full)
é-FSK-POLARI-NOR
--CW-BK-IN---ç-FULL-å
è-TENKEY-----ON
--REMOTE-ID--10
--MIC-KEY----ON
Remote ID
This item selects the ID for the transceiver from 01 to
99. (default: 10)
é-FSK-POLARI-NOR
--CW-BK-IN---FULL
è-TENKEY-----ON
--REMOTE-ID--ç-10-å
--MIC-KEY----ON
Microphone keys
This item activates/deactivates the keys on the mi-
crophone. (default: ON)
é-FSK-POLARI-NOR
--CW-BK-IN---FULL
è-TENKEY-----ON
--REMOTE-ID--10
--MIC-KEY----ç-ON-å
Ten-key function
This item allows direct input for editing frequency, etc.
(default: ON)
é-FSK-POLARI-NOR
--CW-BK-IN---FULL
è-TENKEY-----ç-ON-å
--REMOTE-ID--10
--MIC-KEY----ON
Remote MOD
This item selects the input connector for the modula-
tion signals from an external unit, such as an HF e-
mail modem, TNC (Terminal Node Controller).
Selectable connectors are [AF/MOD], [ACC], [MIC].
(default: AF/MOD)
é-REMOTE-MOD-ç-A/M-å
--REMOTE-I/F-NMEA
è-TX-by-ACC--ACC
--TUNER-STOP-NULL
--TX-by-PTT--MIC
To Next Page
Loading...
Need help?
General
