Icom IC-F7000 Instruction Manual

50
6
SET MODE
6
Sounding Signal Length
This item sets the signal length from 5 sec. to 100
sec. in 1 sec. steps. (default: 5 sec.)
The transceiver repeats to call a calling ID while this
setting time.
ALE-
--ALE---------DISABLE
è-SND-LENGTH--ç-5-å
--AUTO-SOUND--OFF
--DECAY-TIME--1
BER Threshold
This item sets the BER (Bit Error Ratio) threshold
level from 0 to 48 bit for ALE communication quality.
(default: 12)
One unit consists of 48 bit data.
é-BER-THR.----ç-12-å
--GOLAY-THR.--4
è-CALL-RETRY--0
--ERROR-THR.--0
--SILENT------OFF
Golay Threshold
This item sets the Golay threshold level from 0 to 4
bit for ALE communication quality.
(default: 4)
Golay consists of 12 bit original data and 12 correc-
tion data.
é-BER-THR.----12
--GOLAY-THR.--ç-4-å
è-CALL-RETRY--0
--ERROR-THR.--0
--SILENT------OFF
Error Threshold
This item sets the Error threshold level from 0 to 4 for
ALE communication quality.
(default: 0)
When errors detected by BER threshold or Golay
threshold are over this setting, the communication is
NG.
é-BER-THR.----12
--GOLAY-THR.--4
è-CALL-RETRY--0
--ERROR-THR.--ç-0-å
--SILENT------OFF
ALE Silent Mode (Ignore the call)
This item sets the ALE Silent mode ON or OFF.
(default: OFF)
When OFF is selected, the transceiver automatically
answers back if your station ID is called.
é-BER-THR.----12
--GOLAY-THR.--4
è-CALL-RETRY--0
--ERROR-THR.--0
--SILENT------ç-OFF-å
Call Retry Limit
This item sets the retry times from 0 to 99 when called
station does not answer back.
(default: 0)
é-BER-THR.----12
--GOLAY-THR.--4
è-CALL-RETRY--ç-0-å
--ERROR-THR.--0
--SILENT------OFF

Icom IC-F7000 Specifications

General

Brand	Icom
Model	IC-F7000
Category	Transceiver
Language	English