PRT-KLCD Protege Alphanumeric LCD Keypad User Manual | April 2011 43
(8) System Menu
Setting the system menu option allows the menu group to access [MENU,8].
MG010 Sub
[********]
The display will show the option entry screen for the sub menus that the menu group will allow access to. An
option can be toggled on and off by using the numerical keys [1] to [8]. To view the options in text entry mode
press the [STAY] key.
(1) Installer Advanced Menu
Setting the sub menu option installer advanced menu option allows the menu group to access [MENU,4,8] and
the sub menus.
(2) Extra Time Menus
Setting the sub menu option extra time menus allows the menu group to access [MENU,6,2,4] for programming
schedules, holidays and daylight savings.
(3) Bypass Trouble Zones Menu
Setting the bypass trouble zones menu option allows the menu group to access [MENU,7,2] and bypass system
trouble zones.
(4) Allow Area Group Control
When enabled the user will be able to press the [] right arrow key and access area groups from the keypad.
(5) 24HR Area Control
When enabled the user will be able to press the [] left arrow key and access the 24 hour section of areas from
the keypad.
(6) Stay Arming Enabled
Setting the stay arming option allows a user to stay arm an area. An area must be enabled for stay arming.
(7) Force Arming Enabled
Setting the force arming option allows a user to force arm an area. An area must be enabled for force arming.
To Next Page
Loading...
