IEI Technology TANK-820-H61 Series User Manual

TANK -820-H61 E mbedded S ystem
Page 13
2.1 Anti-s tatic P recautions
WAR NING:
Failure to take ESD precautions during installation
may result in
permanent damage to the TANK-820-H61 and severe injury to the
user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the TANK-820-H61. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the TANK-820-H61 or any other electrical component is
handled, the following anti-static precautions are strictly adhered to.
 Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding: Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
 Use an anti-static pad: When configuring the TANK-820-H61, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
TANK-820-H61.
2.2 Unpacking P recautions
When the TANK-820-H61 is unpacked, please do the following:
 Follow the anti-static precautions outlined in Section 2.1.
 Make sure the packing box is facing upwards so the TANK-820-H61 does not
fall out of the box.
 Make sure all the components shown in Section 2.3 are present.

IEI Technology TANK-820-H61 Series Specifications

General

Brand	IEI Technology
Model	TANK-820-H61 Series
Category	Desktop
Language	English