IEI Technology TANK-820-H61 Series User Manual

TANK -820-H61 E mbedded S ystem
Page 85

57600
The transmission speed is 57600

115200 DEFAULT
The transmission speed is 115200
 Data B its [8]
Use the Data Bits option to specify the number of data bits.

7
Sets the data bits at 7.

8 DEFAULT
Sets the data bits at 8.
 P arity [None]
Use the Parity option to specify the parity bit that can be sent with the data bits for
detecting the transmission errors.

None DEFAULT
No parity bit is sent with the data bits.

Even
The parity bit is 0 if the number of ones in the data
bits is even.

Odd
The parity bit is 0 if the number of ones in the data
bits is odd.

Mark
The parity bit is always 1. This option does not
provide error detection.

Space
The parity bit is always 0. This option does not
provide error detection.
 S top B its [1]
Use the Stop Bits option to specify the number of stop bits used to indicate the end of a
serial data packet. Communication with slow devices may require more than 1 stop bit.

1 DEFAULT
Sets the number of stop bits at 1.

2
Sets the number of stop bits at 2.

IEI Technology TANK-820-H61 Series Specifications

General

Brand	IEI Technology
Model	TANK-820-H61 Series
Category	Desktop
Language	English