WEB-6580
【
R1.0
】
User’s Manual 6
How to Use This Manual
This manual is written for the system integrator, PC technician and
knowledgeable PC end user. It describes how to configure your WEB-6580
SERIES to meet various operating requirements. The user’s manual is divided into
four chapters, with each chapter addressing a basic concept and operation of the
server board.
Chapter 1: Introduction - presents what you have inside the box and gives
you an overview of the product specifications and basic system architecture
for the WEB-6580 SERIES server board.
Chapter 2: Hardware Configuration Setting - shows the definitions and
locations of Jumpers and Connectors so that you can easily configure your
system.
Chapter 3: System Installation - describes how to properly mount the main
memory for a safe installation. It will also introduce and show you the driver
installation procedure for the Graphics Controller and Ethernet Controller.
Chapter 4: BIOS Setup Information - specifies the meaning of each setup
parameter, how to get advanced BIOS performance and update to a new BIOS.
Additionally, the POST checkpoint list will give you a guide for
troubleshooting.
The contents of this manual are subject to change without prior notice. These
changes will be incorporated in new editions of this manual. We may make
supplements or changes for the product described in this manual at any time.
To Next Page
Loading...
Need help?
General
