BIOS Setup Information
WEB-6580
【
R1.0
】
User’s Manual 4-29
A9 Returned from adaptor ROM at E000h control. Performing any initialization
required after the E000 option ROM had control next.
AA Initialization after E000 option ROM control has completed. Displaying the
system configuration next.
AB Building the multiprocessor table, if necessary.
AC Uncompressing the DMI data and initializing DMI POST next.
B0 The system configuration is displayed.
B1 Copying any code to specific areas.
00 Code copying to specific areas is done. Passing control to INT 19 h boot
loader next.
4.12 Flash BIOS Utility
Utilize AMI Flash BIOS programming utility to update on-board BIOS
for the future new BIOS version. Please contact your technical window to
get this utility if necessary.
NOTE : Remark or delete any installed Memory Management Utility
(such as HIMEM.SYS, EMM386.EXE, QEMM.EXE, …,
etc.) in the CONFIG.SYS files before running Flash
programming utility.
To Next Page
Loading...
Need help?
General
