BIOS Setup Information
WEB-6580
【
R1.0
】
User’s Manual 4-17
IRQ. No monitoring activity occurs if the option is set to Ignore. The
settings for each of these options are Monitor or Ignore.
4.8 PCI/Plug and Play Setup
This section describes configuring the PCI bus system. PCI (Peripheral
Component Interconnect) is a system which allows I/O devices to operate at
speeds nearing CPU’s when they communicate with own special
components.
All of options described in this section are important and technical and it is
strongly recommended that only experienced users could make any changes
to the default settings.
Plug and Play Aware O/S
Set this option to “Yes” if the operating system installed in the computer is
Plug and Play-aware. BIOS only detects and enables PnP ISA adapter cards
that are required for system boot. The Windows 95 operating system detects
and enables all other PnP-aware adapter cards. Windows 95 is PnP-aware.
Set this option to “No” if the operating system (such as DOS, OS/2,
Windows 3.x) does not use PnP. You must set this option correctly or
PnP-aware adapter cards installed in your computer will not be configured
properly.
Clear NVRAM
To Next Page
Loading...
Need help?
General
