BIOS Setup Information
WEB-6580
【
R1.0
】
User’s Manual 4-16
independently. It is also used to control CPU throttle running function. All
of sub-items will be ineffective in selection of disabling “Stand by Time
out” or “Suspend Time out” even if it can be choose by user in BIOS setup
menu.
Throttle Slow Clock Ratio
This option specifies the speed at which the system clock runs in power
saving modes. The settings are expressed as duty cycle of the STPCLK#
signal. This duty cycle indicates the percentage of time the STPCLK#
signal is asserted while in the throttle mode.
Display Activity
This option specifies if BIOS is to monitor activity on the display monitor
for power conservation purposes. If set to Monitor and the computer is in a
power saving state, BIOS watches for video display activity. The computer
enters the full on power state if any activity occurs. BIOS reloads the
Standby and Suspend timeout timers if activity occurs on the specified IRQ
lines. If set to Ignore, video display monitor activity is not monitored.
IRQ Active
When set to Monitor, these options enable event monitoring on the
specified IRQ. If set to Monitor and the computer is in a power saving state,
BIOS watches for activity on the device with specified IRQ line. The
computer enters the full on power state if any activity occurs. BIOS reloads
the Standby and Suspend timeout timers if activity occurs on the specified
To Next Page
Loading...
Need help?
General
