IFM OGD582 - Functions and Features Overview; General Notes on Functions; Applications of the Sensor; Installation Instructions

5
UK
Visible laser light; LASER CLASS 1�
EN/IEC 60825-1 : 2007 and EN/IEC 60825-1 : 2014
Complies with 21 CFR 1040 except for deviations
pursuant to Laser Notice No� 50, dated June 2007�
Position of the product label Warning sign
14
3 Functions and features
3.1 General notes
The unit is used as a photoelectric distance sensor�
The unit continuously detects the distance to the object and the reflectivity of the
object and generates output signals according to the parameter settings�
• 2 switching outputs are available� They can be set separately� Switch points
can either be set or taught�
• The measured values are shown in a 7-segment display and transferred via
IO-Link� Two measured values are generated�
Measured distance value:
Distance from the front lens of the sensor to the target�
With the basic setting, the status of switching output OUT1 (pin 4) is determined
from this measured value�
Object reflectivity:
Reflexivity of the target�
With the basic setting, the status of switching output OUT2 (pin 2) is determined
from this measured value�
The unit uses a laser diode as light source and creates a light spot� This makes it
possible to detect small objects�