The StellarMate Plus Manual
225 / 341
following options:
o File name: Set SER video file name. Record files may contain some
patterns to make them dynamic:
§ _D_ for the date in YYYY-MM-DD.
§ _H_ for time in HH:MM:SS.
§ _T_ for ISO8601 time stamp.
§ _F_ for filter name, if any.
o Directory: Set SER video remote directory name. If INDI server is running
locally, then a local directory can be selected. However, if you are
capture live video recording optionsconnected to a remote INDI server,
then the directory must be a valid directory on the remote file system
where it is saved. Record directories may contain some patterns to
make them dynamic:
§ _D_ for the date in YYYY-MM-DD.
§ _H_ for time in HH:MM:SS.
§ _T_ for ISO8601 time stamp.
§ _F_ for filter name, if any.
o Record:
§ Until Stopped: Record stream until manually stopped.
§ Duration: Record stream for specified duration in seconds.
§ Frames: Record stream until this many frames are captured.
· Zooming in: You can zoom in to different parts of your live video frame by
clicking and holding, then dragging to another position to create a blue
selection, when you release the mouse, the frame will be zoomed in to the
selected area.
· Reset frame: Unzooms and resets the frame back to default.
· Toggle debayer: Turns on or off Debayering, which is a demosaicing algorithm,
it is a digital image process used to reconstruct a full color image from the
incomplete color samples output from an image sensor overlaid with a color
filter array. It is also known as CFA interpolation or color reconstruction.
· Frame (s): Specifies the amount of frames per second for the video stream.
Click on Apply FPS and restart stream when you set a new value for this field.
· Apply FPS and restart stream: Applies the FPS set in the Frame (s) field and
restarts the stream with the new FPS setting.
To Next Page
Loading...
