A20733 B0 99
Troubleshooting
2.3 Checking the printer’s general operating parameters
In addition to the steps described in the sections above, the printer’s operating status should be
checked.
The information is available in the maintenance function, accessible by pressing
fi. The following parameters should be noted for subsequent investigation:
• the operating pressure P,
• the ink viscosity µ,
•ThejetspeedVj,
• the electronic compartment temperature T1,
• the ink temperature T2 (only for certain ink types).
REMINDER: Typical display
Vm:1500P:2,72bµ : 4,9 Vj : 20,0 m/s 26°C - 20°C
T1
T2
To Next Page
Loading...