18 A20733 B0
SETTING THE DATE
NOTE The display shows "Error: date" if the months or days exceed
the permitted range.
Access
jd
Display
Modify using
b + enter new values, d to move the cursor.
t to change the format (DMY or MDY) if the cursor is under the
first digit of the day.
t to print the month as two digits or three letters if the cursor is
under the first digit of the month.
Choices
Format DMY (D = day, M = month, Y = year).
or MDY (M = month, D = day, Y = year).
Month as two digits or three letters.
I2
Function?...
Date: (DMY) : 10.02.01
Autodating Autodating
To Next Page
Loading...