Imaje S8 Classic - PRINTING: Trigger Mode

44 A20733 B0
PRINTING: Trigger mode
Role
This function is used to define the printing trigger mode.
- In "Manual Object" mode, printing is triggered by pressing the
e.
bar.
- In "Manual Auto" mode, continuous printing is triggered by pressing the
e.bar.
Printing is stopped by pressing the
e. bar again.
- In "Object" mode, printing is triggered by the object detection cell.
- In "Auto" mode, the message is printed continuously while the object
detection cell is active.
NOTE The interval between messages is set by the interval
parameter in the Printing delay function.
Access
Display
Modify using
t
Choices
Mode: "Manual Object" (default mode)
Mode: "Manual Auto"
Mode: Object
Mode: Auto
M13
SPACE
SPACE
SPACE
Function?...
s
Display the message
number by pressing
d or g then v d (5 times)
Mode: Manual object
Message parameters