A20733 B0 19
LIBRARY SIZE
The size of the printer’s library is variable and can be programmed by the operator. The number
of characters available per message depends on the number of messages selected. These two
values are displayed together.
Access
fs
Display
25 = Number of messages in the library.
0150 = Number of characters per message (including unprintable
characters such as expansion value, etc.).
Modify using
b d or g to add or delete messages.
(The number of messages flashes after pressing
b).
IMPORTANT After accessing the library, whether or not the size
is changed, the message "DELETE? Y-N" is
displayed.
If you reply Y (YES), the library is deleted and the
modifications are taken into account.
If you reply N (NO), the library is retained
unchanged, ignoring any modifications.
Choices
1 to 4 messages comprising 1024 characters.
to
79 messages comprising 21 characters.
NOTE This function may be used to delete the messages
loaded by default after resetting the CPU board.
I3
Function?...
25 > 0150 <
Message library
To Next Page
Loading...