Imaje S8 Classic - LIBRARY: Copying Messages And;Or Print Parameters

A20733 B0 37
LIBRARY:Copying messages and/or print parameters
Role
This function is used to:
- Copy a source message to a target message (text and print parameters).
- Copy parameters from a source message to all messages (print parameters,
counter parameters, postdate).
To copy only the print parameters from one message to all other messages,
"**" must be selected instead of the target message number. To do this,
press
g once with target message 01 displayed.
Access
fsd
Display
Modify using
t To select the source or target message
(which flashes).
d or g To modify the flashing message number
(source or target).
b To copy the source message to the target message.
M7
Function?...
Source message
Target message
01 1 Lot 242 45 1 dd:mm:yy
Contents of message 01 Contents of message 45
Message programming