84 A20733 B0
Servicing
3 Preventive maintenance procedures
The purpose of this section is to specify the procedures to be followed regularly. It also explains
the printer shutdown procedures. These procedures depend on the expected duration of the
shutdown, and the restarting procedures are adapted accordingly.
3.1 General preventive maintenance table
FREQUENCY ACTION DURATION COMMENT
When clogging is liable
to cause malfunctions or
poor print quality.
- Clean the print head. 3 mn See head cleaning
procedure.
IMPORTANT: some inks
require special cleaning
procedures as set out on
the ink data sheet.
Every 2000 hours. - Rinse the printer.
- Change the ink filter
cartridge.
2hours
15 mn
Every 6 months. - Change the air filter cartidge. 15 mn
To Next Page
Loading...