IMET M550 - Declaration of Conformity

IMET - M550 ALL1-EN.doc 53/53
13. DECLARATION OF CONFORMITY 0470
The IMET Radio Remote Control, model M550
Date of installation Year of manufacture Serial no.
ID
TRANSMITTING
UNIT
M550
ID RECEIVER
UNIT
M550
is suitable
for installation on machines or other equipment conforming with European Directive 2006/42/EC
(“Machinery Directive”)
and conforms with the technical requirements of the following standards and/or
technical specifications
• EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011
• EN 62311:2008
• EN 60204-32:2008
• EN 62061: 2005
• ISO 13849-1:2006
• EN 13557/A2: 2008
Additional information required by Standard UNI EN ISO 13849-1:2008 and EN 62061: 2005
STOP circuit: PL e, Category 4, SIL3
Joystick controls: PL d, Category 3, SIL2 with Safety STOP activated
Toggle switch controls: PL c, Category 2, SIL1 with Safety STOP activated
• EN 60529: 1991 +A1:2000
• EN 61000-6-2 (2005)
• ETSI EN 301 489-1 v 1.9.2
• ETSI EN 301 489-3 v 1.4.1
• ETSI EN 300 220-1 v 2.3.1
• ETSI EN 300 220-2 v 2.3.1
regarding the protection requirements established by the following EC directives
• 1999/5/EC (Directive R&TTE)
• 2006/42/EC (Machinery Directive)
Sacile, IMET S.r.l.
Evio Cadorin, President