To Next Page

To Previous Page

AUDAX TOP ErP

5.2 PROGRAMMING MENU

Once the device is powered, it goes into the status prior to switch-

o. Press the “Modo” (Mode) (2) button to cyclically select the

desired mode amongst those available.

Depending on the system's conguration, the main screen dis-

plays various information regarding the system.

Press the “Menu” (3) button to access a list of variables that

enable you to customise use of the system.

To browse the menus, which can be accessed by pressing the

relative “RH” or “LH” context buttons, scroll through the

sub-menus displayed by turning the main switch (1).

Press the said main switch (1) to select the one highlighted.

erefore, by pressing repeatedly, you can scroll down the menu

levels and go back to a previous level by pressing the “Indietro”

(Back) context button. To exit the menu completely, press the

“Esci” (Exit) button, which will take you back to the initial page

of normal operation.

To conrm the parameter change, press the main switch (1).

MAIN MENU

Menu item Description

Set Point Zone Denes the operating parameters to manage the zone

Set Point DHW Denes the operation parameters in domestic circuit mode

Time and Program Denes the date/time and time operating ranges

Information Display system operating data

Historical alarm code Displays the list of the last 10 anomalies

Service Password protected menu dedicated to a qualied technician

Language Denes the control panel operation language

1 - Main parameters switch with button to

conrm and save data

2 - Left context button

3 - Right context button

4 - Display

N.B. PARAMETERS ONLY VALID FOR AUDAX TOP 18 - 21 ErP

12:34 Fr 3 Jan 2014

Mode Menu

20.6

°C

Room set 21.0°C

67%

13°C

voltar.com.ua

Brand	Immergas
Model	AUDAX TOP ErP Series
Category	Heat Pump
Language	English

Immergas AUDAX TOP ErP Series User Manual

Table of Contents

Questions and Answers:

Immergas AUDAX TOP ErP Series Specifications

Related product manuals