To Next Page

To Previous Page

AUDAX TOP ErP and Integrated System

41.3 TECHNICAL DATA

e System manager can be powered exclusively via transformer or relevant generator:

- direct power supply: 48 Vdc (36 Vmin…72 Vmax)

- alternating power supply: 24 Vac +10/-15 %, 50/60 Hz

e device has the following features:

- user interface via LCD with matrix

- membrane keyboard with 6 keys

- installation on DIN guide for electric components from control board

- dimensions: L 105 x H 110 x D 60

NOTE:

Electrical connection between the system Manager and

the boilers (except models: range VICTRIX TT ErP,

VICTRIX kW TT, VICTRIX MAIOR TT, VICTRIX EXA,

VICTRIX SUPERIOR ErP, VICTRIX ZEUS SUPERIOR

ErP, ARES CONDENSING ErP, HERCULES MINI

ErP, HERCULES CONDENSING ErP, HERCULES

CONDENSING ABT ErP and HERCULES SOLAR 200 ErP),

must be carried out via electronic relay (abbreviation EMR 12

Vdc code 3.023945);

Operating conditions -10° T 60 °C, 90% RH non-condensing

Degree of protection IP40 only on front panel

Class depending on protection against electric shock to be integrated on Class I and/or II equipment

Period of electric stress of the isolating parts long

Type of disconnection or micro switching micro switching

Category of resistance to heat and re Category D (UL94-V0)

Immunity against surges Category II

Ageing features (functioning hours) 80,000

N° of automatic operation handling cycles 100,000 (EN 60730-1); 30,000 (UL 873)

Class and structure of the software Class A

Surge immunity category Category III (IEC EN 61000-4-5)

- the electrical connection between the System Manager and

the 2, 4 or 6 kW system integrative resistance kit must be set

up using a solid state electronic relay (abbreviation SSR 6 Vdc

code: 3.023946).

voltar.com.ua

Immergas AUDAX TOP ErP Series User Manual

Questions and Answers: