Inficon Ecotec E3000 530-001 - Page 4

0-4 Content
kina22eIVZ.fm Technical Handbook(1206)
3.5.1 Verifying a calibration (proof function) 3-15
3.5.2 Internal calibration 3-16
3.5.3 External calibration 3-17
3.6 Shutdown 3-19
4 Equipment Settings 4-1
4.1 Menu Structure 4-1
4.2 Sleep Mode 4-3
4.3 The Service Menu 4-3
4.4 Selecting gases and setting gas triggers 4-3
4.4.1 Editing gas parameters 4-4
4.4.2 Removing / adding a working gas 4-4
4.4.3 Selecting trigger values and units of measurement 4-7
4.4.4 Selecting the search level and the lower display limit 4-8
4.4.5 Enabling / disabling internal calibration 4-8
4.4.6 Selecting an alternative mass position 4-9
4.4.7 Activating the Interfering Gas Suppression (IGS) 4-10
4.4.8 Setting up a user-definable gas 4-10
4.5 Settings Sub-menu 4-12
4.5.1 Vacuum & Access Menu 4-12
4.5.2 Audio Functions 4-14
4.5.3 Display Settings 4-16
4.5.4 Setting-up / editing an I•Guide Program 4-18
4.5.5 Miscellaneous Settings 4-21
4.6 Interfaces 4-23
4.6.1 Control location 4-23
4.6.2 Recorder outputs 4-23
4.6.3 RS232 Protocol 4-26
4.6.4 Baud rate & end sign 4-27
4.6.5 Select PLC Inputs 4-27
4.6.6 Select PLC Outputs 4-28
4.6.7 ECO-Check (only available in Advanced Mode) 4-29
4.7 The Info Menu 4-30
4.8 History & Maintenance 4-34
4.9 Monitoring Sensitivity 4-39
5 Ecotec E3000 Messages 6-1
5.1 Error Messages and Warnings 6-1
6 Detecting Specific Gases 5-1
6.1 R134a / Cyclopentane 5-1
6.2 R134a / R245fa 5-1
6.3 R600a / Cyclopentane / Isopentane 5-1
6.4 Helium 5-1
6.5 Hydrogen / Forming gas 5-2
6.6 Methan 5-2