Equipment Settings 4-21
kina22e chapter 4.fm technical handbook(1206)
Please use the up and down buttons for editing this parameter.
Default value: 1.0 s
Wait time
The
WAIT TIME between two leak checks allowed to move the sniffer to the next
potentially leaking location can be varied between 0.1 s and 25.0s in steps of 0.1s .
Please use the up and down buttons for editing this parameter.
Default value: 3.0 s
4.5.5 Miscellaneous Settings
Language
Different languages can be chosen in which the software can be operated. The
current selection includes English, German, Spanish, French, Italian, Portugese,
Japanese (Katakana) and (simplified) Chinese (Mandarine).
Default value: English
Notice: If the Ecotec E3000 has been set to a language that you do not understand,
turn off the power and press the second button from the top of the display
on both sides simultaneously during run-up.
This will reset the Ecotec E3000 to English as the menu language. This
setting is not saved automatically. Please go to the
LANGUAGE submenu
afterwards and select the appropriate language.
Time & date
In this submenu the internal clock of the Ecotec E3000 can be set. On the first page
the date needs to be entered in the format DD.MM.YYYY.
The lower right button () opens the second page on which the time in the format
HH.MM is entered.
Sniffer light
The intensity of the sniffer light can be varied to the desired level. The intensity can
be selected between 1 and 6.
Also the light can be switched on and off via the D
ISABLE / ENABLE buttons. Any new
setting must be confirmed with the OK button.
Default value: on, level 4.
Pressure unit
The pressure unit of all displayed values of the Ecotec E3000 can be set to Pa, Torr,
atm or mbar.
Default value: mbar
To Next Page
Loading...
