Infineon Technologies TLE5012B - Angle Value Register

TLE5012B
SSC Registers
User’s Manual 81 Rev. 1.2, 2018-02
Angle Value Register
AVAL Offset Reset Value
Angle Value Register 02
H
8000
H
Field Bits Type Description
RD_AV 15 r Read Status, Angle Value
0
B
no new angle value since last readout
1
B
new angle value (ANG_VAL) present. The bit is
cleared on a read-out (valid for both: normal
operation and update buffer). Note: If an update
event (register snapshot) is done after a normal
read, RD_AV will not be set to 1
B
in the following
read (either update read or normal read) unless a
new value is available.
Reset: 1
B
ANG_VAL 14:0 ru Calculated Angle Value (signed 15-bit)
(6.4)
4000
H
-180° (valid for ANG_RANGE = 0x080)
0000
H
0°
3FFF
H
+179.99° (valid for ANG_RANGE = 0x080)
Reset: 0
H
15 8
7 07 0
RD_ AV
14
ru ru
ANG_VAL
ANG_VAL
ru
][_
2
360
][
15
digitsVALANGAng le
°
=°