Infineon Technologies TLE5012B - Page 87

TLE5012B
SSC Registers
User’s Manual 87 Rev. 1.2, 2018-02
FUSE_REL 10 w Fuse Reload
Triggers reload of default values from laser fuses into
configuration registers.
0
B
normal operation
1
B
reload of registers with fuse values immediately.
Reloaded fuse values are used with the start of the
next filter cycle.
Reset: 0
B
ADCTV_EN 6 w ADC-Test Vectors
Diagnostic function to test ADCs. If enabled, sensor
elements are internally disconnected and test voltages
are connected to ADCs. NO_GMR_A and NO_GMR_XY
status flags will be set to “1”, if this bit is set during
operation. Test vectors can be selected via the register
ADCTV_Y and ADCTV_X.
0
B
ADC-Test Vectors disabled
1
B
ADC-Test Vectors enabled
Reset: 0
B
ADCTV_Y 5:3 w Test vector Y
000
B
0V
001
B
+70%
010
B
+100%
011
B
+Overflow
101
B
-70%
110
B
-100%
111
B
-Overflow
Reset: 0
H
ADCTV_X 2:0 w Test vector X
000
B
0V
001
B
+70%
010
B
+100%
011
B
+Overflow
101
B
-70%
110
B
-100%
111
B
-Overflow
Reset: 0
H
Field Bits Type Description