13
Setting up
• The HDMI ports of this model are compatible with HDCP (High-band-
width Digital Content Protection) and therefore capable of displaying video
signals from HDCP compatible DVD players and the like.
- The HDMI ports support the following signals:
Video signal : 480i@60, 480p@60, 576i@50, 576p@50, 720p@50/60,
1080i@50/60, 1080p@50/60
Audio signal : Format Linear PCM
Sampling frequency 48kHz / 44.1kHz / 32kHz
- This projector can be connected with other HDMI
TM
compatible equipment, but
some equipment may not be compatible with the projector and may not work
properly (for example, no video being displayed).
- Be sure to use an HDMI
TM
cable that has the HDMI
TM
logo.
- Use a Category 2-certied HDMI
TM
cable to input a 1080p@50/60 signal to
the projector.
- When the projector is connected with a device with a DVI connector, use a
DVI to HDMI
TM
cable to connect to the HDMI
TM
input.
• The HDMI
TM
cables may become disconnected easily because there are no
mechanical locks on the cables or connectors. We recommend fastening the
cables to the projector to prevent the cables from coming off (14).
NOTE
Connecting your devices (continued)
(continued on next page)
VCR/DVD/
Blu-ray Disc
TM
player
(26)
(26)
(57)
(26, 52)
To Next Page
Loading...
Need help?
General
