39
Operating
1.
To start the MENU, press the MENU button. EASY MENU will appear just
after the projector is powered on, otherwise the MENU you last used (EASY
or ADVANCED) will appear
Using the menu function
2.
(1) Use the ▲/▼ cursor buttons to select an item
to operate. If you want to make changes in the
ADVANCED MENU, select the ADVANCED MENU.
(2) Use the ◄/► cursor buttons to operate the item.
This projector has the following menus:
PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK,
SECURITY and EASY MENU.
EASY MENU consists of functions often used, and the other menus are classied
into each purpose and brought together as the ADVANCED MENU.
Each of these menus is operated using the same methods. When the projector is
displaying the menu system, the projector's MENU button acts as a cursor button.
Basic menu operations are described below.
In the EASY MENU
(continued on next page)
(1) Use the ▲/▼ cursor buttons to select a menu.
If you want to change make changes in the EASY
MENU, select the EASY MENU.
The items in the menu appear on the right side.
(2) Press the ► cursor button or the ENTER button to
move the cursor to the right side. Then use the
▲/▼ cursor buttons to select an item to operate and press the ► cursor
button or the ENTER button to progress. The operation menu or dialog of
the selected item will appear.
(3) Use the buttons as instructed in the OSD to operate the item.
In the ADVANCED MENU
MENU
button
RESET
button
ENTER
button
ESC
button
Cursor buttons
INPUT
button
To Next Page
Loading...
Need help?
General
