To Next Page

To Previous Page

Operating

Selecting an aspect ratio

 For a computer signal

IN5132, IN5142:

NORMAL  4:3  16:9  16:10

IN5134, IN5134a, IN5144, IN5144a, IN5135, IN5145:

NORMAL  4:3  16:9  16:10  NATIVE

 For a video signal, s-video signal or component video signal

IN5132, IN5142:

4:3  16:9  14:9

IN5134, IN5134a, IN5144, IN5144a, IN5135, IN5145:

4:3  16:9  16:10  14:9  NATIVE

 When there is no signal or an input signal from the LAN, USB TYPE A

or USB TYPE B ports is being used:

IN5132, IN5142: 4:3 (xed)

IN5134, IN5134a, IN5144, IN5144a, IN5135, IN5145: 16:10 (xed)

Press the ASPECT button on the remote control.

Each time you press the button, the projector switches

the aspect ratio as follows.

 For an HDMI

signal

IN5132, IN5142:

NORMAL  4:3  16:9  16:10  14:9

IN5134, IN5134a, IN5144, IN5144a, IN5135, IN5145:

NORMAL  4:3  16:9  16:10  14:9  NATIVE

ASPECT

button

• The ASPECT button does not work when no compatible signal is

inputted.

• The NORMAL mode keeps the source's original aspect ratio setting.

NOTE

InFocus IN5132c User Manual

Other manuals for InFocus IN5132c