35
Operating
1.
Using the magnify feature
2.
3.
4.
Press the MAGNIFY ON button on the remote
control.
The picture will be magnied, and the MAGNIFY
dialog will appear on the screen. When the
MAGNIFY ON button is pressed for the rst time
after the projector is turned on, the picture will be
zoomed 1.5 times. On the dialog, triangle marks to
show each direction will be displayed.
The projector's display magnication switches with every press
of the MAGNIFY ON button.
For computer signals, HDMI
TM
(RGB) signals, input signals from the
LAN, USB TYPE A or USB TYPE B ports
1.5 times 2 times 3 times 4 times 1 time
For video signals, s-video signals, component video signals or
HDMI
TM
(Component) signals
1.5 times 2 times 1 time
While the triangles are displayed on the dialog, use the ▲/▼/◄/► cursor
buttons to shift the magnied area.
Press the MAGNIFY OFF button on the remote control to exit magnication.
MAGNIFY
ON / OFF
buttons
• The MAGNIFY dialog will automatically disappear in several seconds
with no operation. To bring the menu dialog back, press the MAGNIFY ON but-
ton again.
• Magnication is automatically disabled when the signal being displayed or its
display condition changes.
• When magnication is active, keystone distortion settings may vary. They will
be restored when magnication is disabled.
• Some horizontal stripes may be visible on the image when magnication is
active.
• The MAGNIFY function is unavailable when:
- An incompatible sync signal is input.
- There is no input signal.
NOTE
To Next Page
Loading...
Need help?
General
