112
Maintenance
Other care
In order to ensure the safe use of your projector, have it cleaned and inspected by
your dealer annually.
1.
Turn the projector off, and unplug the power cord. Allow the projector to cool
sufciently.
2.
After verifying the projector has cooled adequately, lightly wipe the lens with a
commercially available lens-cleaning wipe. Do not touch the lens directly with
your hand.
If the lens is damaged, soiled or foggy, it could affect the image display quality.
Take care of the lens. Handle with care.
►Before caring for your projector, verify the power cord is
unplugged, and allow the projector to cool sufciently. Caring for the projector
while it is hot can cause a burn and/or projector malfunction.
►Do not service the inside of the projector personally. Doing is so dangerous.
►Do not get the projector wet or allow liquids to spill into the projector. This can
result in a re, an electric shock, and/or projector malfunction.
• Do not put anything containing water, cleaners or chemicals near the projector.
• Do not use aerosols or sprays.
WARNING
►Take good care of the projector by following these instructions.
Incorrect care could cause an injury and cause problems such as discoloration,
peeling paint, etc.
►Do not use cleaners or chemicals other than those specied in this manual.
►Do not polish or wipe the projector with hard objects.
NOTICE ►Do not touch the lens surface with your hands.
CAUTION
Inside of the projector
Caring for the lens
1.
Turn the projector off, and unplug the power cord. Allow the projector to cool
sufciently.
2.
After verifying the projector has cooled adequately, lightly wipe with gauze or
a soft cloth.
If the projector is extremely dirty, dip a soft cloth in water or a neutral cleaner
diluted in water, wring well and then wipe the projector lightly. Then, wipe
lightly with a soft, dry cloth.
Improper care can cause problems, such as discoloration, peeling paint, etc.
Caring for the projector cabinet and remote control
To Next Page
Loading...
Need help?
General
