InFocus IN5132c User Manual

57
AUDIO menu
AUDIO menu
From the AUDIO menu, you can perform the items
shown in the table below. Select an item using the ▲/▼
cursor buttons, and press the ► cursor button or the
ENTER button to perform this item. Then follow the
instructions below.
Item Description
VOLUME
Using the ◄/► buttons adjusts the volume.
Low
ó
High
SPEAKER
Using the ▲/▼ buttons turns on/off the built-in speaker.
ON
ó
OFF
When OFF is selected, the built-in speaker does not work.
AUDIO SOURCE
While the image signal from the input port chosen in step (1) is
projected, the audio signal from the input port selected in step
(2) is output to both the
AUDIO OUT
port and built-in speaker of
this projector. However, the built-in speaker does not work when
SPEAKER is OFF.
(1) Choose a picture input port using the
▲/▼ buttons.
Choose AUDIO OUT STANDBY to
select the sound output in the standby
mode.
(2) Select an audio input port or the mute
icon using the ◄/► buttons.
The icons indicate the following;
No.1:
AUDIO IN1
port No.2:
AUDIO IN2
port
No.3:
AUDIO IN3
ports No.4:
LAN
port
No.5:
USB TYPE A
ports No.6:
USB TYPE B
port
No.7:
HDMI 1
port No.8:
HDMI 2
port
: mutes the sound
• Audio input from port nos.4 to 8 can only be selected by each of
the picture input ports.
• C.C. (Closed Caption) is automatically activated when is selected
and an input signal containing C.C. is received. This function is
only available when the signal is NTSC for
VIDEO
or
S-VIDEO
, or
480i@60 for
COMPONENT
,
COMPUTER IN1
or
COMPUTER IN2
,
and when AUTO is selected for DISPLAY in the C.C. menu under the
SCREEN menu (

64
).
(continued on next page)

InFocus IN5132c Specifications

General

Brand	InFocus
Model	IN5132c
Category	Projector
Language	English