User Manual for the Thermographic System VarioCAM
®
high resolution
4. Unpacking and Checking
10 © InfraTec GmbH 2013 User Manual
4 Unpacking and Checking
Upon receipt of the VarioCAM
®
hr, please check for its completeness and that components are not
damaged. The supplier must immediately be informed of any damage.
The VarioCAM
®
hr system comes in an equipment carrier case or in transport packaging.
The basic package contains the following components:
■ Thermographic camera VarioCAM
®
hr with lens and, depending on version of equipment, integrated
digital colour video camera as well as 3.5" active-colour TFT display
■ 2 pcs. Lithium-ion rechargeable battery NP-QM91D (Sony)
■ Battery recharger
■ SecureDigital card
■ Card adapter for SD card
■ Protective lens cover
■ Shoulder strap
■ User manual VarioCAM
®
hr
■ Brief instructions
■ Equipment carrier case / transport packaging
Optional accessories*
■ External power supply unit (12 V DC) with 14- pin LEMO plug, adapter Lemo 14- pin onto 6- pin
■ Various lenses, close-up rings
■ Lens-protecting apertures, laser-protection filters
■ Breakout Box, system cable, 14- pin, trigger cable
■ Headset
■ FireWire (IEEE 1394) PCI card
■ FireWire (IEEE 1394) cable, 6- pin or 4- pin
■ LWL interface for FireWire (IEEE 1394)
■ Tripod for device
■ Thermographic software of the IRBIS
®
programme family