InfraTec VarioCAM - Operating Software IRBIS remote 3.0; Programme Start-up

User Manual for the Thermographic System VarioCAM
®
high resolution
10. Operating Software IRBIS® remote 3.0*
User Manual © InfraTec GmbH 2013 75
10 Operating Software IRBIS
®
remote 3.0*
The IRBIS
®
remote software enables remote control of the VarioCAM
®
hr as well as image transfer
(based on the image displayed) via or onto a notebook/PC.
10.1 Programme Start
Fig. 159 Symbol of linking with a desktop
IRBIS
®
remote can be started either via the created desktop link or the programme link of the start menu.
Fig. 160 IRBIS
®
remote FireWire connection as it appears on the screen
Please note that the data transfer rate of the programme is limited to max. 25 Hz. However, the frequency
that can be displayed is dependent on the processor capacity and the graphic card of the computer involved.