To Next PageTo Next Page
Need help?Do you have a question about the InfraTec VARIOCAM HD and is the answer not in the manual?
Safety precautions for handling and operating the device, including care and contamination avoidance.
Detailed instructions on safe handling, including avoiding radiation and protecting components.
Explains the operation of the VarioCAM® HD thermography system using infrared spectral range.
Identifies and explains the camera's controls and buttons.
Lists the essential equipment needed for initial setup.
Step-by-step instructions to power on and initialize the VarioCAM® HD.
Guides on using manual and automatic focus for sharp images.
Describes how to automatically or manually set the temperature scale.
Details different ways to save thermal images.
Explains the immediate saving function for capturing images quickly.
Instructions for powering down the camera or activating standby mode.
Methods for transferring captured data to a computer.
Details on connecting the rechargeable battery and wall plug transformer.
Connecting the camera to a PC using the GigE interface.
Identifies and explains the physical controls on the VarioCAM® HD.
Describes the main elements and functions of the camera's user interface.
Guides on automatically or manually setting the temperature scale.
Detailed methods for achieving precise focus.
Focus adjustment without using the laser range finder.
Using the laser range finder for automatic focus adjustment.
Details on saving thermal and photographic images.
Describes the 'Saving with check' feature for reviewing images before saving.
Settings relevant for the representation of the thermal image.
Option for manually setting the temperature scale via the 'Manual' menu.
Functions for loading, saving, and managing image files.
Details various options for saving thermal images and associated data.
Saving thermal images at the maximum possible frame rate.
Defining different shaped measurement objects (ROIs).
Entering emissivity, ambient temp., path temp., humidity, transmission, distance.
Calibrating temperature measurement ranges manually or automatically.
Performing internal camera compensation for measurement accuracy.
Defining conditions that trigger specific camera actions.
Instructions for updating the camera's firmware version.
Step-by-step guide for installing the WinPcap driver software.
Assigning a fixed IP address to the network card for camera communication.
Information on device calibration and recommended check intervals.
General