Thermography System VarioCAM
®
HD
2. Introduction
6 © InfraTec GmbH 2016 User Manual
2 Equipment safety-related instructions
General
The VarioCAM
®
HD is a high-quality, carefully calibrated optical measurement device. Please handle it
with the corresponding care. Avoid contaminations, particularly in the lens areas.
The device is equipped with degree of protection IP54.
Please observe the conditions for use, storage and transportation of the device mentioned within the
framework of the technical data (see chapter 3 Technical description – page 8).
Only use the supplied transport box in order to transport the VarioCAM
®
HD.
Only the manufacturer is allowed to open the camera housing. Any intervention performed by other
persons is inadmissible and will result in the forfeiture of any warranty claims.
Only use accessories or spare parts expressly recommended by the manufacturer regarding the
VarioCAM
®
HD. Otherwise, malfunctions or damages may occur. Any warranty claims are excluded for
such damages.
Standards, directives
VarioCAM
®
HD meets the requirements of the following standards:
■ EN 60950-1:2006 + Einrichtungen der Informationstechnik – Sicherheit – Teil 1: Allgemeine
A11:2009 + A1: 2010 Anforderungen (IEC 60950-1:2005, modifiziert + Cor.: 2006 + A1: 2009
modifiziert) /
Information technology equipment – Safety – Part 1: General requirements
(IEC 60950-1:2005, modified + cor.: 2006 + A1:2009, modified)
■ EN 61326-1:2006 Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-Anforderungen -
Teil 1: Allgemeine Anforderungen (IEC 61326-1 :2005) /
Electrical equipment for measurement, control and laboratory use – EMC
requirements – Part 1: General requirements (IEC 61326-1 :2005)
To Next Page
Loading...